Main features: 1. A larger ground clearance of the chassis enables the rough terrain forklift truck to overcome many kinds of complex terrain; 2. The off-road mobility is enhanced through by driver wheels with the MPT multi-function tires, wide base and cross-country tread pattern; 3. Uses the integral-type combination instruments, the fuse box places in left side of the steering wheel to make it easy to replace. The rough terrain forklift truck is also installed with a cigar lighter; 4. A yellow caution light. Outlay air filter and inside air filter increase the purification performance greatly; 5. Adopting Xinchang A498 Engine to ensure the powerful performance; 6. Adjustable damping seat with safety belt.
Technical Specifications: Power Type: Diesel Rated Load Capacity: 3000kg Load Center: 500mm Standard Lifting Height: 3300mm Mast Tilt Angle (Forward/Backward): 10/12deg. Front Overhang: 600mm Wheelbase: 1850mm Wheel Tread (Front/Rear): 1350/1290mm Service Brake: Hydraulic-Foot Pedal Parking brake: Mechanical-Hand Lever Lifting Speed (Full-load/No-load): 380 / 520mm/s Lowering Speed (Full-load/No-load): Full-load 300mm/s Travel Speed (Full-load/No-load): 20 / 25km/h Max. Gradeability (No-load): 20% Engine Model: XINCHANG A498BPG Rated Power of Engine: 45kW / 2500rpm Max. Torque/rpm of Engine: 193Nm / 1800rpm Displacement of Engine: 3.168L Battery Voltage: 12V Battery Capacity: 100Ah Transmission Type of Gearbox: Hydraulic Gears Shift (F/R) of Gearbox: I/I Tyre Type: Pneumatic Tyres Tyre Model - Front: 14-17.5-14PR Tyre Model - Rear: 10-16.5-10PR Service Weight: 4600kg Free Lift: 120mm Fork Dimensions (TxWxL): 40x125x1070mm Overall Length (without Forks): 2930mm Overall Width: 1800mm Overall Height - Mast Extended: 4650mm Overall Height - Mast Lowered: 2342mm Height - Overhead Guard: 2452mm Min. Turning Radius: 3050mm Min. Ground Clearance - Below Mast: 220mm Min. Ground Clearance - Center of Wheelbase: 315mm
Note: 1. Technical specifications are for standard models only. 2. Other optional accessories, functions and requirements are available upon request. 3. All specifications and design characteristics are subject to change without prior notice.